using the CD player
u
Turn on the unit by pressing the STANDBY Button.
v
If you are not already in CD mode, press the MODE button and select CD mode.
w
Press the “Press to Open” area on the CD lid to open the CD compartment. Gently press a CD onto the center
spindle with the label side facing up and close the CD lid. The total number of tracks will appear in the display.
x
Press the PLAY / PAUSE
button to begin playback. The current track and elasped time will appear in the display.
y
During playback, press the PLAY / PAUSE
button to pause playback and again to resume playback.
U
When the disc is finished playing, it will stop. Press the
STOP
button
to stop the dic before it is finished.
notes:
This unit plays 3 inch single, standard CD, CD-R/RW discs.
If a disc is inserted incorrectly, dirty, damaged or not present at all, “NO DISC” will appear in the display.
Playback will stop when you open the CD compartment, but it is not recommended to open the compartment before
pressing the STOP
button.
using repeat playback
u
While in the STOP / PLAY mode, press the REPEAT button to cycle through the following playback modes:
“Repeat One” (will playback a single track continuously; see the previous section for how to select a desired track),
“Repeat All” (will playback all tracks on the disc continuously).
v
When the playback mode is selected, press the PLAY / PAUSE
button.
note:
To
STOP AND CANCEL REPEAT
playback, press the STOP
button. To just cancel Repeat playback, press the
REPEAT button until the Repeat indicators disappear from the display.
