REV04
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail info@capetti.it - web www.capetti.it
4/6
MWDG-ETH
LAN Configuration Manual
b.
Modify the
Modbus TCP
port
to connect using the MODBUS RTU over TCP protocol.
Click on “Connection” under “Channel 2”.
Modify the
local port
only in the “Endpoint configuration” section, other parameters must not be modified.
This allows to use the virtual COM port on TCP through a port enabled to communication.
ATTENTION: Local Port must be different from 23.
Connessione MODBUS RTU over TCP
La basestation può essere interrogata da remoto attraverso i
c.
Saving: every time a parameter is changed the “OK” button in the bottom of the page must be clicked.
To apply all the changes and restart the ethernet peripheral click on the “Apply Settings” button. Wait for 30
seconds before using again the LAN connection.
