WSD12T-IIDR
User Manual
WA0295E_WSD12T-IIDR_User Manual_R05
V4.6
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail info@capetti.it - web www.capetti.it
3/9
c.
On field transition from USB to Wireless datalogger:
This transition is practicable in field, during the sampling period, using the wireless network association command. When the
association is done, the
datalogger
becomes a wireless
datalogger
and, besides sending new measures to the
basestation
,
starts a download process towards the same
basestation
of the measures acquired during the stand alone period (
refer to
Picture 7 - Stand-alone datalogger status
).
4.
Wireless device user interface.
The user interface consists of a “virtual” button that can be activated using the
and of a two-coloured led.
To give a command, user must approach the
to the device’s sensible area and keep it in that position.; the following
picture (
Picture 4 - WineCapKey positioning
) shows device’s sensible points.
Picture 3 - Device positioning
Picture 4 - WineCapKey positioning
WineCapKey
LED
