59
EN
OPERATION
Changing speed from miles to kilometers
1. Pull out the safety key, press the “SPEED+” and “SPEED-” keys at the same
time. If the speed show 0.6, the speed is in MPH.
2. Pull out the safety key, press the “SPEED+” and “SPEED-” keys at the same
time. If the speed show 1.0, the speed is in KMH
Safety key function
In any state, pull-out safety locks, window displays:”E7” and sound buzzer “DI-
DI-DI”. Then put well the safety lock, all show that the full light for 2 seconds,
then go to manual start mode.
Start
• Put the power cord into the electrical outlet with 10A. Flip this switch to
the “ON” position. The screen shines with prompt sound.
• Put the safety key on the correct position ,then turn on the power ,the
LCD window light flash,and sound “beee”, the treadmill enter in to the P0
Normal Mode.
• Press “PROG” key to cycle select the program P0-P36, U01-U03, FAT.
• P0 is User program. Press “MODE” cycle select four training mode. User
can select the speed and inclination. Speed default is 1.0 km/h, inclination
default is 0%.
Training mode 1:
Counting time, distance, calorie is plus. The select
function is closed.
Training mode 2:
Time Countdown. Under selecting, time window flash,
press “+” or ”-“ to modify the value. The range is 5-99 minute. Default is
30:00 minutes.
Training mode 3:
Calories Countdown. Under selecting, calories window
flicker, press “+” or ”-“ to modify the value. The range is 20-990 CAL.
Default is 50 CAL
Training mode 4:
Distance Countdown. Under selecting, Distance window
flash, press “+” or ”-“ to modify the value. The range is 1.0-99.0 km. Default
is 1.0 km.
Summary of Contents for 10032952
