Instruction manual C808C
Please keep this instruction manual for future reference
18
ADJUSTING THE BRACKET POSITION
Fix the hob to the work surface by screwing 4 brackets on the bottom of hob (see
picture) after installation. Adjust the bracket position to suit different worktop
thicknesses.
15
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto any area.
Fix the hob to the work surface by screwing four brackets to the bottom of hob (see picture) after installation.
A
B
C
D
screw bracket Screw
hole base
Adjust the bracket position to suit for different work surface’s thickness.
Caution
1. The ceramic hob must be installed by qualified personnel or technicians. We have professionals at your service.
Please never conduct the operation by yourself.
2. The ceramic hob must not be mounted to cooling equipment, dishwashers and rotary dryers.
3. The hob must be installed such that better heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface must withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
A
B
C
D
HOB
WORK SURFACE
A
HOB
WORK SURFACE
B
BRACKET
BRACKET
CAUTIONS:
- The ceramic hob should not be mounted next to cooling equipment, dishwashers
and rotary dryers.
- The wall and cooking zone above the work surface must withstand heat.
- To avoid any damage, the worktop sandwich layer and adhesive must be heat
resistant.