background image

 

19 

• Do not use pans with jagged edges or drag pans across the ceramic glass surface as this 

can scratch the glass.   

• Do not use scourers or any other harsh abrasive cl

can scratch the ceramic glass. 

• If the power supply cable is damaged, it must only be replaced by a qualified technician. 

ternal timer or separate remote-control system. 

•This appliance is intended to be used in household and similar applications such as: -staff kitchen 

areas in shops, offices and other working environments; -farm houses; -by clients in hotels, 
motels and other residential type environments ; -bed and breakfast type environments. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
DISPOSAL: Do not 
dispose this product 
as unsorted municipal 
waste. Collection of 
such waste separately 
for special treatment is 
necessary.

 

This appliance is labeled in compliance with European directive 
2002/96/EC for Waste Electrical and Electronic Equipment (WEEE). 
By ensuring that this appliance is disposed of correctly, you will help 
prevent any possible damage to the environment and to human 
health, which might otherwise be caused if it were disposed of in the 
wrong way. 
 
The symbol on the product indicates that it may not be treated as 
normal household waste. It should be taken to a collection point for 
the recycling of electrical and electronic goods. 
 
This appliance requires specialist waste disposal. For further 
information regarding the treatment, recover and recycling of this 
product please contact your local council, your household waste 
disposal service, or the shop where you purchased it. 
 
For more detailed information about treatment, recovery and 
recycling of this product, please contact your local city office, your 
household waste disposal service or the shop where you purchased 
the product.

 

 

eaning agents to clean your hob , as these 

• Do not operate your hob by means of an ex

Summary of Contents for C813C




















Reviews: