The ice marker will be reset when the power is switched on first time so that
the shelf of ice-marker is located level position.
1.1.2
Filling in water
Opening valve of ice marker and filling in water for 5s after the shelf is located
level position.
1.1.3
Icing process
The process is to evaluate if the water in shelf of ice-marker can be iced
completely after the filling in water end.
It is checked by sensor which is assembled at bottom of shelf of ice-marker. after
icing, the moving ices will be run
1.1.4
Move ice process
After icing, the moving ices will be run. i.e ice in shelf will fall into the store box
The logic process is:
Remark:
the moving ice action is carried out twice in order to ensure that the ice of shelf is
moved out completely
1.1.5
Ice-marker closing
The shelf of ice-marker will be reset to level position after the switch of
ice-marker is closed. icing function stops
The dispenser can be operated for taking ice and water
1.2
Control program of dispenser
The function of taking ice and water will be stopped when F-door is opened in
order to avoid secure risk
The related icons need to be chosen first before the ice or water is taken, and
then , press the switch of dispenser to get the ice or water
1.2.1
Dispensing crushed ice
：
Choose the crushed ice button on DOM, and then, press the switch of dispenser,
Y
N
evaluate if the ice
in
store-box
is
filled or not
the moving ice action
will be carried out
keep the level position
of shelf and suspend the
moving ice action
Y
the ice quantity in
store-box is
checked per 1houre
N
