6
Temperature-adjustable compartment
It can be set to different
based on
temperatures
the needs of the food stored.
l
Set to Fruit and Vegetable mode for food
that can't be frozen.
l
Set to Zero Degree Fresh-keeping Mode for
perishable food that could be frozen and stored
for a short period.
l
The drawer for the temperature-adjustable
compartment has a maximum load no greater
than 10Kg.
Remove
and
re-install
the temperature-
adjustable compartment
(1). Pull out the drawer of the temperature-
adjustable compartment:
(2). Find the hook at the left and right sides at
the drawer bottom of the temperature-
adjustable compartment (shown in the Fig.
below).
(3). Hold the hook at two sides with
nose
re-install
pliers or tweezers and push it up and out of
the groove of sliding rail, and take out the
hook at the other side with the same method.
(4).
the drawer
Remove
(5). Install the drawer by putting the hook into
the right place
Hook
Sliding rail
Correct Use for Your Refrigerator
7
Introduction of Your Refrigerator's Functions
1.
Operation keys
A.
Temp zone B. C. Quick cooling mode
D.
-
E. Energy saving mode F.
lock
2.Display contents
1.
Quick cooling icon 2. Quick-freeze icon 3. Energy-saving icon
4. Refrigerator temperature setting icon 5. Freezer temperature setting icon 6.
Lock icon 7. Refrigerator icon 8. Freezer icon 9. Refrigerator temperature 10.
Freezer temperature 11. Refrigerator turn-off icon
3.Initial power-on
4, 6, 8, 9 and 10 turn on at initial power-up. 1, 2, 3, 5, and 11 do not turn on.
4.Lock and unlock
In the unlock state (icon 6 does not turn on), push the key F to enter the lock state
and icon 6 turns on. In the lock state, push and hold the key F for 3 seconds, icon 6
turns off and the lock is cancelled. In the unlock state, in case of no other input
after 25 seconds, it enters the lock state automatically.
The following functions operate in the unlock state.
1.Energy-saving mode
Entry: push the key E, the icon 3 turns on. Choose the energy-saving mode to
operate the
, and the mode operated before will be cancelled.
Exit:
①
enter other modes
②
push the key B or D to the set temperature
③
push
the key E. When each condition mentioned above occurs, the
exits
the energy-saving mode.
2.
Quick-cooling mode
Entry: push the key C, the icon 1 turns on. Choose the quick cooling mode to
operate the refrigerator. If the refrigerator is operating in the energy saving
mode, the energy saving mode exits.
Exit:
①
enter the energy saving mode
②
push the key B or D to the set
temperature
③
push the key C. When each condition mentioned above occurs,
the
exits the quick cooling mode
.
+
child
using
any buttons
refrigerator
refrigerator
refrigerator
Drawer of the temperature-adjustable compartment
