12
13
Installing the door handles
inner socket head cap
screw for handle fixing
chilling chamber door handle
inner socket head cap screw
for handle fixing
Installation process for the door handles
Difference between the
and refrigeration handle: lie them flat, the one with higher
freezer
chordal height is the refrigeration handle
Freezer
door handle
Refrigeration handle
Erection instructions
door handle:
for the freezer
1.
Firstly, take the handle set bolts out from the refrigerator, use cross head
screwdriver
the door. Fix it tight with all the screw thread twisted
to tighten on to
through the hole, as shown in the figure;
2.
After the first step is completed, take the
storage door handle out from the
Freezer
box, place it as per the direction shown in the figure (Note: i.e. the direction which
both screw holes on the handle are close to the edge), and hang the handle above
the set bolt;
3.
Use the small hexagon spanner supplied in the box to set the handle fixing
socket head cap screws into both the small screwed holes on the handle. After they
are screwed down, gently shake the handle, so as to confirm that the handle is well
fixed.
Installation
instructions of the refrigeration door handle:
The
steps of the
door handle is same as that of the cold
installation
fridge
storage door handle. Please note that: during the
of the handle, the direction
installation
of tapping hole is downward (to the ground).
Energy saving tips and notices
Energy Saving Tips
·
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
·
Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Foods that freeze
too slowly may lose quality, or spoil.
·
Be sure to wrap foods properly, and wipe containers dry before placing them in
the appliance. This cuts down on frost build-up inside the appliance.
·
should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less
efficient.
·
Organize and label food to reduce
and extended searches. Remove as many items as needed at one time, and close
the door as soon as possible.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
–
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-
in structure, clear of obstruction.
–
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
–
WARNING: Do not damage the refrigerant circuit.
–
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
This appliance is intended to be used in household and similar applications such as
–
staff kitchen areas in shops, offices and other working environments;
–
farm houses and by clients in hotels, motels and other residential type
environments;
–
bed and breakfast type environments;
–
catering and similar non-retail applications.
The storage areas
the number of times the doors are opened
