background image

Instruction manual CAFF60

Instruction manual CAFF60

6

7

Please keep this instruction manual for future reference 

Please keep this instruction manual for future reference 

C A U T I O N :

This appliance is not intended for use by persons 

(including children) with reduced physical sensory or 

mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety. Children should be supervised to ensure 

that they do not play with the appliance.

C A U T I O N :

The appliance can be used by children aged from 8 years 

and above and persons with reduced physical sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand 

the hazards involved. Children shall not play with the 

appliance. Cleaning and user maintenance shall not be 

made by children without supervision.

C A U T I O N :

If the supply cord is damaged, it must be replaced by 

Caple, an approved engineer or similar qualified persons in 

order to avoid a hazard.

C A U T I O N :

Do not store explosive substances such as aerosol cans 

with a flammable propellant in this appliance.

C A U T I O N :

If the power socket does not match the refrigerator plug, 

it must be replaced by Caple, an approved engineer or 

similar qualified persons in order to avoid a hazard.

C A U T I O N :

A specially grounded plug has been connected to the 

power cable of your refrigerator. This plug should be used 

with a specially grounded socket of 16 amperes. If there 

is no such socket in your house, please have it installed by 

an authorised electrician.

I M P O R T A N T   N O T E :

 

-

This product is not designed for commercial use, it is a 

household appliance only. It is not intended to be  

used in:

• Staff kitchen areas in shops, offices and other working 

environments.

• Bed and breakfast type environments.
• By clients in hotels, motels and other residential type 

environments. 

Please read this booklet before installing and switching 

on this appliance. Caple take no responsibility for incorrect 

installation and usage as described in this booklet

Summary of Contents for CAFF60


























Reviews: