8
How to use your extractor
Remote control:
6 - channel radio control for cooker hood remote
Technical data:
Alkaline battery powered: 12v mod. 23A Operating
frequency: 433.92 Mhz Combinations: 4096 Max.
consumption: 25mA
Operating temperature: -20° : +55°C
- To turn the cooker hood on or to turn it off press
the following button:
- To increase the speed up to the fourth one
press button:
- To reduce the speed up to the second one
press button:
- To go from a high speed back to the first one press
twice the following button:
- To switch on the lights or to shut them
down press button:
- To set the timer up press the following button:
Maintenance
Correct
maintenance
helpts to ensure optimal
performance and a long life
. Special care needs
to be taken with the grease filter:
It should be
cleaned on a regular basis to prevent the build up
of grease. T
o access the filter, proceed as
described in the
panel opening
chapter.
Remove the grease filter, using the special
handle.
To refit the grease filter after cleaning, carry out
the same operation in reverse order. To remove the
carbon filter, if fitted, follow the same steps as
for the grease filter. The carbon filter is located
immediately above the grease filter.
The charcoal filter has to be removed at first giding
it inside
the location
and then rotating it and
removing it.
Charcoal filters should be replaced at least every 6
months. More with heavy use. These can be
purchased from your retailer or directly from Caple
at www.caple.co.uk or call sales on 0117 938 1900
Tepid water and neutral detergents are
recommended to clean the appliance,
any
abrasive
products should
not be used
.
Once cleaned dry
with a soft cloth.
When you switch on the appliance
, pres
s and
hold
th
is
button for 5 seconds
The LED on the right side will start to flash
(every 5 seconds), the hood will work for 10
minutes at the selected speed and then it
switches off
automatically.
If the
user
increases or reduces the speed while
the timer is on, this is automatically stopped
Dimensions
8
How to use your extractor
Remote control:
6 - channel radio control for cooker hood remote
Technical data:
Alkaline battery powered: 12v mod. 23A Operating
frequency: 433.92 Mhz Combinations: 4096 Max.
consumption: 25mA
Operating temperature: -20° : +55°C
- To turn the cooker hood on or to turn it off press
the following button:
- To increase the speed up to the fourth one
press button:
- To reduce the speed up to the second one
press button:
- To go from a high speed back to the first one press
twice the following button:
- To switch on the lights or to shut them
down press button:
- To set the timer up press the following button:
Maintenance
Correct
maintenance
helpts to ensure optimal
performance and a long life
. Special care needs
to be taken with the grease filter:
It should be
cleaned on a regular basis to prevent the build up
of grease. T
o access the filter, proceed as
described in the
panel opening
chapter.
Remove the grease filter, using the special
handle.
To refit the grease filter after cleaning, carry out
the same operation in reverse order. To remove the
carbon filter, if fitted, follow the same steps as
for the grease filter. The carbon filter is located
immediately above the grease filter.
The charcoal filter has to be removed at first giding
it inside
the location
and then rotating it and
removing it.
Charcoal filters should be replaced at least every 6
months. More with heavy use. These can be
purchased from your retailer or directly from Caple
at www.caple.co.uk or call sales on 0117 938 1900
Tepid water and neutral detergents are
recommended to clean the appliance,
any
abrasive
products should
not be used
.
Once cleaned dry
with a soft cloth.
When you switch on the appliance
, pres
s and
hold
th
is
button for 5 seconds
The LED on the right side will start to flash
(every 5 seconds), the hood will work for 10
minutes at the selected speed and then it
switches off
automatically.
If the
user
increases or reduces the speed while
the timer is on, this is automatically stopped
Dimensions
10