Caple CGI900SS, Installation And Operating Instruction Booklet

7

ƒ

It is dangerous to alter the specifications or attempt to modify this product in any way.  

ƒ

Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. 

ƒ

All installations must comply with the local authority’s requirements for the discharge of exhaust air. 

ƒ

Incorrect installation may affect the safety of this cooker hood. 

Installation Requirements 

ƒ

The Installation work must be undertaken by a qualified and competent person. The manufacturer disclaims any 

responsibility to damages due to incorrect installation of the cooker hood or if the cooker hood is not installed in 

compliance with relevant regulations controlling this type of installation. 

Unpacking 

Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton. 
 

Clearance Heights 

•

This cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated. 

o

Electric hob not exceeding 7kw a clearance height of 650mm is required 

o

Gas hob not exceeding 10kw a clearance height of 650mm is required. 

•

If the output of the appliance below the cooker hood exceeds the maximum outputs quoted for each kW in 

excess of 10kw the distance between extractor and gas hob must be increased by 10cm. 

However it is the manufacturer of the gas hob who determines the clearance required between 

hob & extractor and the clearance quoted by the gas hob manufacturer must be followed. 

•

There is no mandatory clearance for electric hobs and the clearance as quoted above should be followed. 

•

If the hob manufacturer provides no instructions, cannot provide the installer with the dimension or, in the 

case of an old hob, no dimensions can be found; the installer must follow the BS 6172 “Default Standard” 

and ensure that a clear “box”, as in the illustration below, exists above and around hob.  

 
 
 
 
 
 
 
 
 
 
Note: The 760mm clearance is between the top of the burners and combustible material and not from the 

worktop. In practice, since the burners are usually 30-40mm above the level of the worktop, this means the 

clearance is effectively 790-800mm.  
 
 
 
 
 
 

I N S T A L L I N G   T H E   C O O K E R   H O O D  

E X T R A C T O R   I N S T A L L A T I O N   R E G U L A T I O N S