30
AUTOMATIC COOKING
To cook in the oven in automatic mode follow the instruc-
tions below:
1. Set the cooking time
2. Set the end of cooking time
3. Set the cooking temperature and function
These operations are carried out as follows:
1. Set the cooking time by pressing button
and then
to move forward or
to move back if you have gone
beyond the required time (fig. 7.8).
The letter A and the symbol
appear.
2. Press button
; the cooking time already added to the
clock time appear.
Set the end of cooking time by pressing button
; if you
go beyond the required time, you can go back by press-
ing button
.
The symbol
go out and the letter A remains on (fig.
7.9). If during the setting the letter A begins to flash on
the display and the acoustic signal comes on, this indi-
cates a programming error, i.e. the cooking cycle has
been superimposed on the clock time. In this case alter
the end of cooking time or the cooking time as above.
3. Set the cooking temperature and function via the func-
tion selector and thermostat knob (see specific chap-
ters). The oven is now programmed and everything will
work automatically; the oven will come on as required
and finish cooking at the programmed time.
At the start of the cooking the symbol
appear.
During cooking the letter A and the symbol
remains on;
press button
to display the remaining time until end of
cooking or press button
to display the end of cooking
time.
The cooking program can be cancelled at any time by
pressing the two buttons
simultaneously.
At the end of cooking, the oven switch off, the symbol
go out, the letter A flash and the acoustic signal come on -
this can be switched off by pressing any of the buttons.
Reset the function selector and thermostat knob and set
the programmer to manual by pressing the two buttons
simultaneously.
Caution: If the electricity supply is cut off (the display
numbers will flash), the clock will reset and all the pro-
grams entered will be cancelled.
A
A
Fig. 7.8
Fig. 7.9
