Caple DD910BK, Instruction Manual

12

Careful maintenance ensures 

the correct

 operation and 

optimal

 performance

.

MAINTENANCE

HOW TO PROCEED?

ACCESSORY PRODUCTS TO

USE

External surfaces and 

accessories 

Do not use metallic scrubbers, 
abrasive products, or hard brushes.

To clean the external surfaces of the 
cookerhood and the light housing 
screen use only commercially avail-
able household detergents diluted 
in water. Then rinse with clean water 
and dry with a soft cloth. 

Active charcoal filter 

with extractable 

unit open 

After 30 hours of operation, the 
downdraft will signal the grease filter 
saturation.
The saturation is signaled by the 
blinking of the 4 central leds.
To reset, hold down the timer button 

 for at least 3 seconds, while the 

carriage is open.

The grease filters can be washed by 
hand or in the dishwasher. These fil-
ters need to be cleaned on a regular 
basis, because otherwise they may 
represent a fire risk. 
Refit the grease filters and front 
panel, making sure that the panis 
properly fitted at the sides so that it 
it does not cause the downdraft to 
stop operating. 

Active charcoal filter 

In the recirculation mode, the 
active charcoal filter must be 
replaced periodically. 
To remove the charcoal filter first of all 
it is necessary to remove the grease 
filter and then pull the plastic key of 
the panel itself, in order to disengage 
it from its seating. 
Follow these steps in reverse order to 
insert the active charcoal filter. 
Replace the used charcoal filter on 
an average of every six months.

Cleaning the extractor

CAUTION

The hood must be disconnected from the electrical network, both by unplugging the appliance 
from the socket and activating the magnetic circuit breaker (safety cut-out), before removing 
the metal grease filters. After cleaning operations, replace the metal grease filters as outlined 
in the installation instructions.