background image

10

USE OF THE GRILL

Set the switch to position 

and the

thermostat knob between 50°C and the
maximum position.

Leave to warm up for approximately 5
minutes with the door closed.

Introduce the food to be cooked, posi-
tioning the rack as close to the grill as
possible.
The dripping  pan should be placed
under the rack to catch the cooking
juices and fats.
Grilling with the oven door closed.

Grilling with the oven door closed and
do not for longer than 30 minutes at
any one time.

Attention: the oven door becomes
very hot during operation.
Keep children away.

COOKING DIFFERENT DISHES AT
THE SAME TIME

With the function selector in position 

, the ventilated oven allows you to cook
different types of food at the same time. 
Fish, cakes and meat can be cooked
together without the smells and flavours
mixing. 
The only precautions required are the
following:

– The cooking temperatures must be as

close as possible with a maximum dif-
ference of 20° - 25°C between the dif-
ferent foods. 

– Different dishes must be placed in the

oven at different times according to
the cooking time required for each
one. This type of cooking obviously
provides a considerable saving on
time and energy. 

GRILLING AND “AU GRATIN” 

Grilling may be done without the roast-
ing jack on position 

of the switch,

because the hot air completely envelops
the food that is to be cooked.
Set the thermostat knob between 50°C
and the maximum position 
and after
having preheated the oven, simply place
the food on the rack. 
Close the door and let the oven operate
until grilling is done. 
Adding a few dabs of butter before the
end of the cooking time gives the golden
“au gratin” effect.

Grilling with the oven door closed.
It is recommended that you do not
grill for longer than 30 minutes at any
one time.
Attention: the oven door becomes
very hot during operation.
Keep children away.

Summary of Contents for MULTIFUNCTION OVENS

































Reviews: