13
Instruction manual Oi363
Please keep this instruction manual for future reference
R E C I R C U L AT I N G V E R S I O N
› Place the top fixing bracket (Fig.5.1) on the ceiling. Drill 4 holes, 8mm each, next to
the slots.
› Insert the plastic dowels into the holes (Fig.5.1A). Fix the air deflector (Fig.5.2) to the top
fixing bracket (Fig.5.3) with the four self tapping screws provided (Fig.5.3A).
› Screw the top fixing bracket to the ceiling together with the air deflector (Fig.5.1B).
› Fasten the lower structure (Fig.7.2) to the hood by making sure its holes and the metric
thread screws welded on the fan support coincide (Fig.7.1).
› Insert the washers and nuts provided and screw with an appropriate tool.
› Connect the ducting to the power unit ducting spigot and fix securely with a hose clamp.
› Insert the upper structure (Fig.7.3) into the lower structure and adjust its height as required
by matching it with the cooking top’s minimum height.
› Tighten the two structures securely with the screws provided (Fig.7.3B).
› Insert the two extension tubes from above (Fig.7.4 fits into Fig. 7.5), adjust the two
structures to get them to the appropriate level. Lift the hood together with the structure
and the chimney sections to make the four springs (Fig. 7.6) hook to the slots (Fig.7.3C).
› Then tighten the two elements securely (Fig.6.1 & Fig.6.2) with the safety screws (Fig.6.2A)
and connect the ducting to the air deflector.
› Make the electrical connections.
› Lift the upper tube (Fig.7.5) up to the ceiling and insert the two self-tapping screws
(Fig.7.5D).
W A R N I N G :
Before connecting the flexible exhausting pipe to the motor, make sure the stop valve, which is
on the air outlet of the motor, can open and close freely.
