16 Instruction manual Oi363
Please keep this instruction manual for future reference
S TA N DA R D C O N F I G U R AT I O N :
Standard configuration requires all cooker hood remote controls to be provided with the same
transmission code. In the event two cooker hoods radio control system are installed in the same
room or nearby, each system may affect the operation of the another. Therefore, the code of
one radio control system must be changed.
G E N E R AT I N G A N E W T R A N S M I S S I O N C O D E :
The radio control system is provided with preset codes. Should new codes be required, proceed
as follows: Press simultaneously buttons:
for two seconds. When LED’s light on, press buttons:
(within 5 seconds). LED’s flashing 3 times indicate the procedure is completed.
W A R N I N G :
This operation permanently deletes the preset codes.
L E A R N I N G T H E N E W T R A N S M I S S I O N C O D E :
Once the transmission code is changed in the remote control unit, the electronic central unit of
the cooker hood must be made to set the new code in the following way:
Press the main power-off button on the hood and then restore power to the electronic control
unit. Within the next 15 seconds, press the Light Button to synchronise the central unit with
the code.
