Instruction manual RBL4
Please keep this instruction manual for future reference
13
TRANSPORTATION AND REPOSITIONING
Transportation and changing of installation position.
- Original packaging and foam may be kept for re-transportation (optionally).
- You should fasten your fridge with thick packaging, bands or strong cords and
follow the instructions for transportation on the packaging for re-transportation.
- Remove movable parts (shelves, accessories, vegetable bins etc.) or fix them into
the fridge using bands or tape.
TROUBLESHOOTING
If your refrigerator is not working properly, it may be a minor problem, therefore
check the following, before calling for after sales service.
The appliance does not operate,
Check if;
- There is a power failure.
- The mains plug is not properly plugged in, or is loose.
- The thermostat setting is on position “•“.
- The socket is defective. To check this, plug in another appliance that you know is
working into the same socket.
The appliance performs poorly;
Check if;
- You have overloaded the appliance.
- The door is not closed perfectly.
- There are not enough ventilation ducts in the kitchen unit as mentioned in
the installation manual.
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry, this is
quite normal. If these sounds are different check if;
- The appliance is installed firmly as described in the installation manual.
- Objects in the appliance are vibrating.
RBL4 - Instruction Manual.indd 13
18/04/2016 15:49
