Instructions for Installation
Instructions for Installation
3
Cautions
Cautions
Cleaning and Maintenance:
Cleaning and Maintenance:
Detergent
6
5. For your safety and protection, this unit is grounded through the electrical plug
when plugged into a wall outlet. If you are not sure whether your wall outlet is
properly grounded, please consult a qualified electrician.
o
1. Do not tilt the refrigerator more than 45 from upright when moving it.
Avoid collision and violent vibration during transit. Do not apply force to any
part such as condenser, the door or its handle in order to prevent damage as
performance may be affected.
2. Ensure that there is enough space around the refrigerator for correct functioning
and circulation.
3. The refrigerator should be kept away from high temperatures, direct sunlight and
humid conditions.
4. The refrigerator should be placed on a solid floor.
1. When cleaning the refrigerator, disconnect the power cable.
Rub carefully with a piece of cloth soaked with neutral cleanser, then wipe it
clean with fresh water. Do not wash the refrigerator with water directly to
prevent the unit from rust and breakdown.
2. Never use acids, chemical solution, thinner, gasoline or similar to clean the
refrigerator because they may damage the painting cover and plastic parts of it.
3. Once or twice a year dust the compressor at the back of the appliance with a
brush or vacuum cleaner, as an accumulation of dust will affect the performance
of the appliance and cause excessive electricity consumption.
·
When defrosting, never use sharp or metallic objects to remove the frost on the
surface of the evaporator, as this will cause damage.
·
Do not store bottled beverages in the freezing compartment, to prevent it being
broken and causing damage.
·
Keep space between the food packets to allow the cold air to circulate smoothly
in the fridge or freezer compartment.
