1.
Remove the fan cover by flexing the fan cover detail and then remove the fan motor
by flexing the fan motor rubbers. (Pic-1/ Pic-2/Pic-3)
Picture-1
Picture-2
Picture-3
2.
Place the rubbers to the fan motor. After that, first place the bottom two details of
the fan motor and place the top two details by pressing-flexing it. (Pic-4/ Pic-5/Pic-6)
Note : The fan motor cable outlet should be at the top-left corner of it.
3.
After the connector is connected, place it by flexing it and then reassemble the multi
flow by screwing.
Picture-4
Picture-5
Picture-6
RFF730 Caple 70/30 Freestanding Fridge Freezer