Take the reed switch out of its place with a screwdriver. (Picture-2) Then Disconnect the
connectors of the Switch and remove it. (Picture-2)
Picture-1
Picture-2
NOTE: Reed Switch is a very sensitive miniature electronic card. So during the assembly and
disassembly be carefull not to damage it.
During the disassembly of the reed switch, there is a step on the edge of the plastic part
which provides easier dissassembly and by that tool it can be taken out from the same place
every time.
It must be assembled as this step should be in the invisible(inside of the refrigerator)part.
Otherwise The distance which the lamp turn on/off may change.
After the assembly or replacement the service should check if the reed switch is damaged by
giving energy and opening and closing the door.
RFF730 Caple 70/30 Freestanding Fridge Freezer