Maintenance
Changing the door handing
Cleaning
Use dry towels to wipe off the fingerprints left on the panel.
Regularly clean the freezer rear part and the ground.
The freezer should have its interiors frequently cleaned in order to avoid odour. While cleaning, please
unplug the power, use soft towels and neutral detergents, and finally use clear water to clean it.
Do not use the following materials to clean the freezer:
·Alkaline or weakly alkaline cleaning agent; (The container and the plastic components may crack)
·Soap powder, light gasoline, banana oil, alcohol and so on; (The plastic parts may be damaged)
·If dirtied with edible oil or sauce, please erase it. (The plastic components may crack)
Light and replacement
If the lights fail, please contact Caple service (the number can be found on the front of the manual).
Shutdown
No use for a prolonged period: You should unplug the power, so as to avoid electric shocks or fires due to power line aging;
clean the freezer inside; let the doors open for a period of time until the interior is completely dry.
Power failure: When the power fails, do try to reduce the number of times the door is opened; it is not appropriate to add
fresh food.
Disposal: If a freezer is discarded, its door seal must be removed to prevent any child entering and being sealed in the freezer.
1. Remove the two screw caps and the two hinge end caps on the top decorations (when the door is opened
to the r
ight.)
2 Remove the roof decorative components
3. Remove the two screws to fix the top hinge, draw the top hinge out from the side, remove it together with the door, and
finally take the hinge out from the door.
8
9
Left hinge endcap
Right hinge endcap
Roof decoration
Screw cap
Roof decoration
Roof decoration
Harness
Two screws
Hinge