background image

Instruction manual RiF1795

Please keep this instruction manual for future reference

3

WARNING:

 

 

-

Keep vantilation openings, in the appliance enclosure 

or in the built-in structure, clear of obstruction.

 

-

Do not use mechanical devices or other means to 

accelerate the defrosting process, other than those 

recommended by the manufacturer.

 

-

Do not use electrical appliances inside the food 

storage compartments of the appliance, unless they 

are of the type recommended by the manufacturer.

 

-

Do not damage the refrigerant circuit.

 

-

To avoid a hazard due to the instability of the 

appliance, it must be fixed in accordance with the 

instructions.

WARNING:

 

-

If your appliance uses R600a as a refrigerant – you 

can learn this information from the rating label on 

the cooler- you should be careful during transport 

to prevent your appliance’s cooler elements from 

being damaged. Although R600a is an environmental 

friendly and natural gas, as it is explosive, in case 

of a leakage to be occurred due to a damage in the 

cooler elements move your freezer from open flames 

or heat sources and ventilate the room where the 

appliance is located for a few minutes.

RIF1795_Freezer Instruction Manual.indd   3

07/02/2017   10:36

Summary of Contents for RiF1795





























Reviews: