background image

21

Instruction manual RiF892

Please keep this instruction manual for future reference 

I N S TA L L I N G  T H E   F U R N I T U R E   D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

A. Door guide

B. Door guide cover

 ›  Open the cabinet door and the freezer door, mark on the back of the cabinet door where 

the top of the freezer door reaches. Place the door guide (part A) on the back of the cabinet 
door, in the location shown below and mark the position of first hole and the last hole on 
the door guide. Fix the door guide into place with 2 torx headed screws.

 › Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

19

RI5505 Fridge Freezer Instruction Manual.indd   19

RI5505 Fridge Freezer Instruction Manual.indd   19

05/02/2020   14:30

05/02/2020   14:30

I N S T A L L I N G   T H E   F U R N I T U R E   D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where 
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet 
door, in the location shown below and mark the position of first hole and the last hole on 
the door guide.  Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

19

RI5505 Fridge Freezer Instruction Manual.indd   19

RI5505 Fridge Freezer Instruction Manual.indd   19

05/02/2020   14:30

05/02/2020   14:30

I N S T A L L I N G   T H E   F U R N I T U R E   D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where 
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet 
door, in the location shown below and mark the position of first hole and the last hole on 
the door guide.  Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

19

RI5505 Fridge Freezer Instruction Manual.indd   19

RI5505 Fridge Freezer Instruction Manual.indd   19

05/02/2020   14:30

05/02/2020   14:30

I N S T A L L I N G   T H E   F U R N I T U R E   D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where 
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet 
door, in the location shown below and mark the position of first hole and the last hole on 
the door guide.  Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

Summary of Contents for RIF892









































Reviews: