5
Installation dimensions
-
Refer to the dimensions on the following page
-The arrow denotes the air flow
Ventilation
The main consideration when installing a refrigeration product into a cabinet is ventilation. The heat removed
from the appliance need to be dissipated into the room. Failure to correctly ventilate the product can result in
increased running costs and premature failure. It will also invalidate the guarantee provided with the
appliance.
An air intake in the plinth is required to allow for the correct air flow (recommended 500mm x 40mm). If
preferred a decorative stainless steel plinth grille is available, product code: GRILL/SENSE600. This can be
purchased from your retailer or www.caple.co.uk.
To ensure the correct operation of the appliance it is important the top of the housing is not blocked off. The
top of the cabinet needs to be vented into the room, the recommended size of the vent opening is 500mm x
40mm.
There should also be space at the rear of the cabinet to allow the cool air to be drawn over the condenser.
This should also be at least 500mm x 40mm.
The more air available to circulate the product, the more efficiently it will operate.
