Caple RiL892, Instruction Manual

11

Instruction manual RiL892

Please keep this instruction manual for future reference 

E L E C T R I C A L   C O N N E C T I O N

For your safety please read the following information.

W A R N I N G :

This appliance must be earthed.

This appliance operates from 220-240 volts and should be protected by a 13 amp fuse  
in the plug.

The appliance is supplied with a standard 13 amp 3-pin mains plug fitted with a 13-amp fuse. 
Should the fuse require replacement, it must be replaced with a fuse rated at 13 amp and 
approved to BS1362.

If the mains plug which is fitted is unsuitable for the socket outlet in your home or is removed 
for any other reason, please follow the instructions below on how to wire a 13 amp 3 pin plug.

H O W   TO   W I R E   A   1 3   A M P   P L U G.

I M P O R TA N T :

The wires in the mains lead on this appliance are 
coloured in accordance with the  
following code:

Green and Yellow - Earth

Blue – Neutral

Brown – Live

As the colours may not correspond with the 
markings identifying the terminals in your plug proceed as follows.

The green and yellow wire must be connected to the terminal in the plug which is marked with 
the letter E or with the earth symbol 

with the letter E or with the earth symbol

 or coloured green and yellow

 or coloured green and yellow.

The blue wire must be connected to the terminal marked N.

The brown wire must be connected to the terminal marked L.

You must make sure the lead is firmly secured under the cord clamp.

As the colours may not correspond with the markings 

GREEN/YELLOW 

Earth

BROWN 

Live

FUSE

13 Amps

BLUE 

Neutral

Cord Clamp

- The appliance is heavy and could cause injury, it must 
be transported by two people.

DISPOSAL OF OLD APPLIANCE:

- Old fridges and freezers contain isolation material and 
refrigerant with CFC. Therefore, take care not to harm 
environment when you are discarding your old fridges.
- If your old fridge or freezer has a lock, break or remove 
the lock before discarding it, because children may get 
trapped inside it and may cause an accident.
- Be careful to avoid damaging the pipework before 
disposal, e.g. by puncturing coolant channels, bending 
pipework, scratching the surface coating. 

RISK OF ELECTRIC SHOCK

R I S K   O F   E L E C T R I C   S H O C K