Caple RiL892 Instruction Manual Download | Manualshive

Page: 20 / 36

background image

20 Instruction manual RiL892

Please keep this instruction manual for future reference

I N S T A L L I N G T H E F U R N I T U R E D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

A. Door guide

B. Door guide cover

› Open the cabinet door and the fridge door, mark on the back of the cabinet door where

the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet

door, in the location shown below and mark the position of first hole and the last hole on

the door guide. Fix the door guide into place with 2 torx headed screws.

› Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

I N S T A L L I N G T H E F U R N I T U R E D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet
door, in the location shown below and mark the position of first hole and the last hole on
the door guide. Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

I N S T A L L I N G T H E F U R N I T U R E D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet
door, in the location shown below and mark the position of first hole and the last hole on
the door guide. Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

I N S T A L L I N G T H E F U R N I T U R E D O O R

Locate parts A and B (see the below) in the bag with the installation accessories:

> Open the cabinet door and the fridge door, mark on the back of the cabinet door where
the top of the fridge door reaches. Place the door guide (part A) on the back of the cabinet
door, in the location shown below and mark the position of first hole and the last hole on
the door guide. Fix the door guide into place with 2 torx headed screws.

> Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

A. Door guide

B. Door guide cover

A

B

«
...
18
19
20
21
22
...
»

Summary of Contents for RiL892





































Reviews:

No comments

Related manuals for RiL892

Profile 24 CustomStyle

Brand: GE Pages: 44

Brand: ChiQ Pages: 9

Brand: NEFF Pages: 86

Brand: Beper Pages: 36

Brand: Hanseatic Pages: 60

Brand: German pool Pages: 27

Brand: Igloo Pages: 11

Brand: Dometic Pages: 60

Diplomat DAR163BLDP

Brand: Danby Pages: 30

Brand: Progress Pages: 40

Brand: Samsung Pages: 80

Brand: Samsung Pages: 80

Brand: Samsung Pages: 36

Brand: Samsung Pages: 40

Brand: Samsung Pages: 68

Brand: Samsung Pages: 92

Brand: Danby DIPLOMAT Pages: 24

Brand: Electrolux Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands