Caple TDF200, Instruction Manual

• CLEANING THE APPLIANCE

25

24

EN

EN

6 / REGULAR MAINTENANCE

Fig. 31

• CHANGING THE BULB

You can replace the light bulb (type E14-
15W/230V) yourself 

(Fig. 31)

.

Important :

Unplug the power cord before chan-

ging the bulb.

To do this :
— Unscrew the glass cover located to the left
inside the appliance.
— Unscrew the extinguished bulb and replace it.
— Screw on the glass cover tightly.

Important :

The bulb must be replaced when the

appliance is cooled down.

6 / REGULAR MAINTENANCE

Fig. 27

Fig. 28

Fig. 29

Fig. 30

Important :

The condenser must be cleaned twice

a month.

Important :

Unplug the power cable from the

socket before cleaning the condenser.

— Open the grill at the front of the appliance.
— Release the condenser

(Fig. 27)

.

— Remove it carefully 

(Fig. 28)

.

— Remove any lint from the condenser.
— Clean it with water only under the tap

(Fig.

29)

.

— After cleaning, ensure that none of the tubes
are “blocked” and that the fins are clean.
— Rub it superficially.
— Re-insert the condenser and lock it in place.
Close the grill.

Important :

When refitting the condenser, ensure

that it is pushed in firmly right to the back of
its housing when locking it in.

• CLEANING THE CONDENSER

Advice :

To clean the control panel, the access

to the drum and the casing, use only a
sponge or a damp cloth and some soapy
water.

— Ensure that there is no fluff accumulating
round the dryer.

— Clean the door seal with a damp cloth.
— Clean the filter housing with your vacuum
cleaner once a year.

You should n

no

ott  u

us

se

e,, under any circumstances

(Fig. 30)

:

— Abrasive powders
— Metal or plastic sponges
— Alcohol-based products (alcohol, thinners,
etc.)