• LOADING LAUNDRY INTO THE DRUM
• CHECKING THE CONDITION OF YOUR LAUNDRY
11
10
EN
EN
4 / PREPARING YOUR ITEMS
Fig. 05
— Always adhere to the manufacturer's ins-
tructions when using softening products.
Advice :
If, before you insert your clothes in the
tumble dryer, you notice any stains, even
after washing, do not dry the items concer-
ned. As a general rule, stains that have been
ironed or tumble-dried can no longer be
removed.
Please refer to the instructions for treating
stubborn stains provided in most washing
machine instruction manuals and, in particu-
lar, wash the stained items again.
•
•
Preparing your laundry :
— Close all zippers and snap buttons.
— Remove any loose buttons, pins or hook fas-
teners.
— Knot any belts, apron strings, etc...
— Empty pockets, especially lighters and mat-
ches.
•
•
Special notes on steam programs :
— Sort the laundry by fabric type
— Do not mix new coloured fabrics with white
fabrics.
Important :
Do not tumble-dry the following
articles :
— Clothing including rubber like materials (for
example: shower caps, waterproof clothing
and textiles, linings, pillows etc.)
— Chlorofibres (Thermolactyl* for example)
*Registered trademark
— Items containing underwiring that could
become detached
— Bulky items (duvets, eiderdowns, etc...)
— Laundry that has not been spun
— Laundry cleaned with inflammable chemi-
cals.
Important :
Check the labels on your laundry
Normal
drying
Gentle
drying
Do not tumble dry
— Open the door by pushing (press where the
label is)
(Fig. 05)
.
— Check that the filter is in its housing .
— Insert washed and spun clothes loosely in
the drum w
wiitth
ho
ou
utt ffo
olld
diin
ng
g iitt o
orr p
piilliin
ng
g iitt u
up
p..
— Take care not to let any fabrics get caught in
the door.
— Close the door.
•
•
Recommended loads :
The maximum capacity of the dryer is 8 kg.
— To reduce creasing and optimize drying
times, we recommend you do not overload the
machine.
— To optimise the performance of the wrinkle-
removing cycles, we recommend that you limit
the quantity of laundry at 2 kg.
3 / INSTALLING YOUR TUMBLE DRYER
• ELECTRICAL CONNECTION
Danger :
To make the electrical connection to your appliance :
— Do not use an extension, an adapter, a multiple socket or a programmable timer.
— The plug must be easily accessible but be out of children’s reach.
— If there's any doubt about the condition of your installation, contact your installer or a qualified
Brandt-approved professional.
— Never eliminate the electrical Earthing system.
The electrical installation must comply with the prevailing standards and the Electricity Board’s
regulations in the country concerned, particularly regarding Earthing and installation in shower
rooms.
We cannot be held responsible for any incident caused by poor electrical installation.
• REPLACING THE ELECTRIC POWER CABLE
Important :
To ensure your safety, this must be carried out by the manufacturer's after-sales service
team or a qualified professional.
Advice :
In order to easily find your appliance’s reference numbers in the future, we recommend
that you note them down on the “After-Sales Service and Consumer Relations” page (this page
also explains where to find these on your appliance).
Your appliance complies with European Directives 2006/95/EEC (Low Voltage Directive) and
2004/108/EEC (Electromagnetic Compatibility).
Summary of Contents for TDF200
Page 17: ...TDF200 WS2U00020_00 04 10 ...