Caple TDF200 Instruction Manual Download

Page: 8 / 17

5 / PROGRAMMING

• Steam refresh :

Thanks to the steam action, this program
allows you to eliminate odours from laundry
that has been put away in a closet.
This program lasts 20 minutes.
— Choose your program using the

Programs

dial

. The indicator lights up, displaying

your choice.
— Validate by pressing the "

Start

/Pause" .

• End of program and automatic

tumbling at the end of the "Steam

Program" cycle :

At the end of the Steam programs and during
the tumbling phase, the display indicates
“End”.

Tumbling is activated as soon as the selected
program is completed. During the tumbling
phase, the

drum rotates constantly

to prevent

the laundry from settling and wrinkling.
This phase lasts 30 minutes.
During the tumbling phase, you can remove
the laundry from the drum after pressing the
“Start/

Pause

”

button. This action termina-

tes the tumbling phase and makes it possible
to empty the drum with the light on.
The

“Filter”

and

“Full tank”

indicator lights

blink alternately to remind you to clean the fil-
ter and empty the water recovery tank after
each cycle.

Cotton

Mixed

S T E A M

Cotton

Mixed

Stretch

Delicates

Remarks :

During the tumbling phase, if you have selected the "Buzzer" option, it will sound every

minute.

Advice :

To optimise the effectiveness of the steam programs, we advise you to :

— Remove the entire load, one item at a time, as soon as the program ends or during the tum-
bling phase
— Place the clothing on hangers
— Promptly iron the garments, if necessary

Remarks :

It is normal for the garments to be slightly damp at the end of the Steam programs. This is

to make ironing easier. Similarly, with small loads of laundry, it is possible to have damp spots
after a steam program.

5 / PROGRAMMING

• Cotton program :

Thanks to the combined action of steam and
laundry tumbling, this program allows you to
rid "Cotton"-type textiles of wrinkles to facili-
tate their ironing.
This program lasts 18 minutes.
— Choose your program using the

Programs

dial

. The indicator lights up, displaying

your choice.
— Validate by pressing the "

Start

/Pause" .

Cotton

• Mixed program :

Thanks to the combined action of steam, tum-
bling and laundry preheating, this program
allows you to rid "Mixed"-type textiles (polyes-
ter, synthetics, etc.) of wrinkles to facilitate
their ironing.
This program lasts 20 minutes.
— Choose your program using the the

Programs dial

. The indicator lights up, dis-

playing your choice.
— Validate by pressing the "

Start

/Pause" .

Mixed

• “STEAM” PROGRAMS

Your appliance is equipped with 3 “STEAM” programs :

- Cotton
- Mixed
- Refresh -

Thanks to their steam action, the "Cotton" and "Mixed" programs allow you to gently remove wrin-
kles from your laundry and soften creases, whether the fabric was air dried or put through the
dryer.

As a result, your ironing becomes faster and easier and some items can even be put away
without ironing.

The “Steam refresh” program lets you "air" and freshen laundry that has been shut away in a clo-
set.

Important :

These programs can only be used for laundry that is already dry, just before ironing. We

recommend that you do not exceed the recommended load (see chart on following pages).

Important :

The steam programs should not be used with the following textiles: knitted wool; leather;

clothing with metal, wood or plastic notions; clothing made from metal that may rust; oilskin or
other similarly coated garments.

Important :

The Steam tank is empty when your appliance is delivered. Before using the Steam pro-

gram for the first time, fill the tank with demineralised water or with water from the recovery tank

(see how to proceed in the "EVERYDAY MAINTENANCE" chapter).