Please keep this instruction manual for future reference
Instruction manual TDI4000 15
»
Mount the furniture door to the front
of the dryer using the hinges.
»
Fix the spacers (1) in place with the 2
screws (2) and then fix the hinges with
2 screws (3).
P L I N T H V E N T I L AT I O N
The plinth must have ventilation slots (min side/diameter 127mm hole) according to the
dimensions on the fixing template. If the plinth is not high enough to accommodate the entire
hole, cut only part of it.
»
Place the template onto the reverse of the
plinth. Mark the screw hole positions, then
drill them out.
»
Fix the plinth to the kick plate using 6
screws provided. (J)
NOTE:
This is only possible with some types of kick plate (e.g. wood or plastic). We suggest to check with
the kitchen suppliers.
J
Min. Ø127mm
105mm
93mm
93mm
Min.
Ø127mm
504mm
Please keep this instruction manual for future reference
Instruction manual TDI4000 15
4
5
6
7
1
2 3
Mount the furniture door to the front
P L I N T H V E N T I L AT I O N
The plinth must have ventilation slots (min side/diameter 127mm hole) according to the
dimensions on the fixing template. If the plinth is not high enough to accommodate the entire
hole, cut only part of it.
»
Place the template onto the reverse of the
plinth. Mark the screw hole positions, then
drill them out.
»
Fix the plinth to the kick plate using 6
screws provided. (J)
NOTE:
This is only possible with some types of kick plate (e.g. wood or plastic). We suggest to check with
the kitchen suppliers.
J
Min. Ø127mm
105mm
93mm
93mm
Min.
Ø127mm
504mm
machine using the hinges. Fix the spacers (1) in
place with the 2 screws (2) and then fix the hinges
screws (3).
of the dryer using the hinges.
Fix the spacers (1) in place with the 2
screws (2) and then fix the hinges with 2
11
2
3