Instruction manual WC6510 & WC6520
14
Please keep this instruction manual for future reference
H O W TO C H A N G E T H E D O O R O P E N I N G
1. Incline the wine cooler with 45 degrees, take out right lower hinge’s screws and supports
screws with screwdriver. (Fig.1)
2. Level the wine cooler Hold the door and take out right upper hinge’s screws with screwdriver,
then take out the door, put the door safety, unscrew 2 screws at bottom and remove the
magnet, then install at top of frame,and take out the location-plate’s screws and fix location-
plate on the other side, and rotate door at 180 degree. (Fig.2 & Fig.3 & Fig.4)
3. Remove limited block B as per the arrows in picture, then release all the screws on limited block
A, and take away limited block A. Install the limited block A at the right side with screws, then
install limited block B,then fit the door with screws, then fix the support on the lower right side.
(see Fig.5& Fig.6& Fig.7)
N OT E
Once door reversal complete please check and ensure door magnet is at the bottom of door.
7
How to change the door opening
6
7
45
1
2
45
3
4
180
Limited block
B
Limited block
A
5
support
location-plate
WC6510 & WC6520 Instruction Manual.indd 14
08/10/2019 10:10
