5 of 8
Installation of Shelves (For WCi30B Wi3112 Wi6221)
To fit or remove the shelf, tilt the shelf as per the diagram and simply pull out, or push the
shelf in until it sits on the support brackets securely.
Installation of Shelves (For Wi6111)
Firstly remove both of the plastic posts with the Phillips screwdriver, then pull on onward
direction to remove the shelf.
NOTE:
•
If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the wine Cabinet will not
start.
•
When you use the wine Cabinet for the first time or restart the wine Cabinet after it has been
switched off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED readout. This is normal and it
is due to the length of the activation time. Once the wine Cabinet has been running for a
few hours, the temperature display will re-gain accuracy.
