5
DOOR REVERSAL (For WF331)
WE RECOMMEND THAT SOMEONE ASSISTS YOU DURING THIS PROCESS. TOOLS
REQUIRED: PHILIPS SCREWDRIVER. (A BOTTOM LEFT HAND HINGE IS SUPPLIED
WITH EACH CABINET.)
Rubber cover Screw
Decorative cover
Screw Top hinge module
Door
Lower hinge module-Left Screw
Cabinet leg-small)
Cabinet leg-High
1. Unclench the rubber cover with the
plastic tablet.(see Fig.A)
2. Screw off the 2pcs bolts with cross-
screwdriver. Then, take off the
decorative cover.
3. Loose the bolts with cross-screwdriver,
remove the top hinge, take the door
upwards and remove the door.
(Note: Pls support the door when
remove the door to avoid any damage
or injure caused due to the door fall
down.(See Fig.B)
4. Loose the bolt with cross-screwdriver
and take off the lower hinge(left). Screw
off the small cabinet leg, then keep it
carefully for standby.
5. Screw off the high cabinet leg on the
left side, install in into the same position
on the right side.(see Fig. C)
6. Take out the lower hinge(left) from the
spare parts box, screw the small cabinet
leg into the same position.
7. Install the lower hinge(left) into the left
down side of the cabinet, and lock it
with the bolts.
8. Install the door on the left hinge as the
way it pulling out, lock the top hinge,
and fit on decorative cover and rubber
cover. Then, the steps finish.
