background image

4

A manual containing the operating, maintenance

and installation instructions is supplied with this
washing machine. Please read all the instructions
before using the washing machine, as indicated
in the symbol.

Do not dry any items in the tumble dryer if they

have not been previously washed.

Do not wash any articles that have previously

been cleaned, washed, soaked or treated with
petrol, dry cleaning solvents or any other flammable
or explosive substances, as these produce vapours
which could catch fire or explode.

Do not add petrol, dry cleaning solvents or any

other flammable or explosive substances to the
washing water, as these produce vapours which
could catch fire or explode.

Any items stained with substances such as

cooling oil, acetone, alcohol, petrol, kerosene,
stain remover, turpentine, wax or wax removing
products must be washed in hot water with extra
detergent before drying them in the tumble dryer.

Items such as foam rubber (latex foam), shower

caps, waterproof fabrics, rubber-lined items and
clothing or pillows stuffed with pieces of foam
rubber must not be dried in the tumble dryer.

Do not repair or replace any part of the washing

machine or attempt to carry out any type of
servicing, unless it is expressly recommended in
the maintenance instructions in the manual.

If the power cord is damaged, it must be

replaced by the manufacturer, their after-sales
service or similar qualified personnel, to avoid
hazards.

Do not use an extension lead or adaptor plug

to connect the washing machine to the mains.

Do not climb onto the washing machine or lean

on the loading door when it is open.

The machine must only be used for the purpose

for which it is designed.

Follow the washing instructions recommended

by the manufacturer of the garment to be washed.

Fabric softeners or similar products should be

used as described in the fabric softener instructions.

The appliance should not be installed behind a

lockable or sliding door or a door with the hinges
on the opposite side to where the tumble dryer is
located.

Do not start up the washing machine until you

have ensured that:

• It has been installed in accordance with the

installation instructions.

• IAll the water, drainage, electrical and earth

connections comply with local legislation and
any other applicable regulations.

The final stage of a tumble dryer cycle does not

use heat, so as not to damage the items (cooling
cycle). Never stop the tumble dryer before the end
of the drying cycle, unless you quickly remove all
the items and lay them out for them to cool down.

This appliance is not designed for use by people

(including children) whose physical, sensorial or
mental capacities are impaired, or who lack
sufficient experience or knowledge, unless they
are supervised or have been instructed in the use
of the appliance by a person responsible for their
safety. Children must be supervised to ensure they
do not play with the appliance.

warnings

Summary of Contents for WDi2202





























Reviews: