Instruction manual ZC621 / ZC921
12
Please keep this instruction manual for future reference
How to replace the charcoal filter
Squeeze the clips on the charcoal filter and pull the filter back towards you to remove it.
Replacing the bulbs
- This extractor is fitted with two 1.5W LED lights. The illumination is designed for use during cooking and not for prolonged
periods of time to light the kitchen. Prolonged use of the lights may reduce the life of the bulbs.
Warning
Do not touch or change the bulbs when the hood is operating. Wait until the bulb is cool before removing.
Use the same bulbs as the originals (1.5W LED). Replacement bulbs are available from www.caple.co.uk.
Removing the LED lights
- With the grease filter removed, from inside the hood press the light fixture out of its mounting bracket.
- Unplug the light from the wiring harness. Avoid direct contact between the lens and your hand Then replace with the new
one.
- Push the light into its mounting bracket
Note
The light is only meant for use during cooking and not for illuminating the surroundings for longer periods. If the light is
used for longer periods, this will considerably shorten the life of the bulbs.
ZC921-621 - Instruction Manual.indd 12
20/11/2015 10:32
