background image

  

CAUTION:

As long as the grinder is in operation, DO NOT open the bean 

  container lid, DO NOT open the filter basket and DO NOT insert your finger or
  any other object into the grinder.

• After brewing is finished the cup icon light will turn off. For the next 1 to 2 

  minutes hot coffee will still pass from the filter into the carafe.

• To serve coffee, remove the carafe from the platform.
• Push and hold the pouring lever and slowly pour coffee.

IMPORTANT:

If you hear a loud buzzing noise during grinder operation or if the

grinder gets blocked or jammed, push the brew button to stop grinding and
unplug the machine and follow cleaning instructions in chapter 10.5. 

8.1 DRIP STOP / STOP AND SERVE 

• While the coffee is brewing you can remove the carafe to pour a cup or two. 

  The drip stop will close automatically.

• To avoid any overflow, replace the carafe within 20 seconds.

  

CAUTION:

The drip stop might not close completely allowing coffee to drip 

   onto the platform. In this case immediately place carafe back into the machine

  and let all the coffee flow into the carafe.

• After brewing is finished, check the GoldTone filter for any clogging and rinse 

  the filter insert to remove any coffee particles from the drip stop (Fig. 5).

8.2 GRINDING AND BREWING LATER ("AUTO")

• Coffee maker is plugged in and the time and auto-on time are set.
• Beans are in the bean container and bean container lid is on and pushed 

  down securely.  

• Fill the water tank with the desired amount of water.
• Make sure the filter insert and GoldTone filter are in place and the GoldTone 

  filter is empty.

• Make sure the filter holder is closed.
• Insert the carafe with lid, into the machine.
• Push the AUTO button briefly. The clock icon will illuminate on the display.

  At the preprogrammed time, the clock icon will disappear, the cup icon will 
  illuminate and the grinding and brewing will start.

  Recommendation:

If you want your coffee ready by 7:30, set the auto-on 

  time to 7:15.
  

NOTE:

See chapter 7.1, b for 

Setting the Auto-On Time

.

9. BREWING COFFEE WITHOUT THE GRINDER

You can use your CoffeeTEAM PRO like a regular drip coffee maker with pre-
ground coffee (without using the grinder).
• Remove the water container (Fig.1.12) and fill to the desired amount of cups.

  Place water container back onto the machine and push down to fully engage 
  the base valve. 

• Push the filter holder button to open and fill ground coffee into the 

  GoldTone filter. Close the filter holder.

• Insert the carafe with lid into the machine.
• Push the GROUND COFFEE button and the scoop icon illuminates.
• Push the BREW button. The cup icon illuminates and the brewing process 

  starts immediately.

13

Summary of Contents for CoffeTEAM PRO Therm 478



















Reviews: