background image

-capsula.com

c

-capsula.com

c

English

English

D

GB

30

29

•  Luggage and other similar objects should therefore be stored away properly and 

  be well fixed.

•  Car interiors can become very hot when in direct sunlight, it is therefore 

  recommended that the child seat should be covered when not in use. 

  This prevents components, particularly those attached to the child seat, becoming 

  hot and burning the child.

•  Make sure, that all passengers in your vehicle have their seat-belt fastened, 

  as unfastened 

  passengers can become a big danger to children in case of an accident.

•  Allow children breaks during long car journeys and make sure, they don‘t get out 

  of the car alone without supervision.

•  Always use the child safety lock system, if available in your car, to make it impossible  

  for children to open the vehicle doors from the inside.

•  Never leave your child unattended in or outside the car.

•  Store this child seat in a safe place when it is not being used

•  Avoid placing heavy objects on top of it. Do not allow your child seat to come into  

  contact with corrosive substances e.g. battery acid.

•  Always make sure that the belts only run along the tracks clearly marked by red marks 

  on the child seat (guideline markings).

•  Loose or hanging parts of the seat should not be obstructed or restrained by other  

  belts, belt locks or seats.

•  Always secure 

capsula

®

 MT6 

child seat with the vehicle‘s adult 

  seat-belt, even if no child is sitting in.

• The 

HEYNER

 child restraint systems can be used for many years. It is therefore possible 

  that some parts are subject to wear and tear for example, the seat cover and have to  

  be replaced at some point.

•  Make sure that all hard or plastic parts are stored away and can not be lost.

•  The child seat must never be used without its original cover. Should the seat cover 

  need to be replaced, only use 

HEYNER MOBIL AUTOMOTIVE GMBH

 seat covers.

•  Always keep the instruction manual together with the child seat.

•  This child restraint has been declared Universal under more stringent conditions than  

  those applied to earlier designs which do not carry this notice.

6. Some final hints:

•  Do not place heavy objects on the hat rack. In case of an accident, these could  

  become dangerous objects and can injure you and your child. 

Summary of Contents for MT6























Reviews: