background image

CAR-MON PRODUCTS, INC.   1225 Davis Road, Elgin, IL   60123   Phone (847) 695-9000

Web Site:   www.car-mon.com   e-mail:   info@car-mon.com

BA BALANCER-CONTINUED

MAINTENANCE
No regular maintenance is required, but in the interest of safety, the cable and hanger bracket should be 
checked periodically for wear. If wear is detected, replacement parts should be ordered and replaced 
immediately.
LUBRICATION
Balancer is factory lubricated-no additional lubrication is required.
SPRING, CABLE, AND RATCHET ASSEMBLY
Unit should be sent to factory for authorized repair. Call 847-695-9000 and ask for customer service and 
you will be given a return goods authorization number. Send unit freight prepaid for repair.

Please note that over tensioning the unit can cause the spring mechanism to break. This condition is not 
covered under the manufacturer's warranty.

PULL-UP SETS

Instead of using a retracting balancer to pull tubing out of the way, a more economical method is using a 
pull-up set with or without a winch. If this option is used, a separate instruction sheet will be included with 
shipment.

LIMITED WARRANTY

Car-Mon Products, Inc. shall replace or repair at its discretion any products or components sold or 
manufactured which prove to be defective in workmanship or materials within 1 year from date of shipment.

The foregoing is in lieu of all warranties, expressed or implied, and all other obligations or liabilities on 
behalf of the company, regarding products it may manufacture or sell. Except as otherwise provided herein, 
the purchaser accepts the product "as is". 

No warranty is made regarding the suitability or compatibility of any Car-Mon product for a particular 
application or purpose unless specifically stated. The Customer is responsible for the final selection and 
utilization of Car-Mon products for their use. The Customer assumes all liability for the consequences of 
performance, application, use and/or misuse by employees of products purchased from Car-Mon Products, 
Inc.

In no event shall Car-Mon Products, Inc. be liable for consequential or special damages; for transportation, 
labor, or other charges for adjustment, replacement, installation, incorrect electrical connections, 
overloading of motor, performance at low voltage, or other alterations which may be performed in 
connection with such products. The warranty specified herein is waived in the event that the Distributor, 
Contractor, or Purchaser perform any unauthorized repairs or modifications to the product.

With regard to products or components which are furnished by Car-Mon, Inc. but not manufactured by Car-
Mon, Inc., the warranty obligation of Car-Mon shall be limited to and be the same as that of its supplier.

Page 4

Summary of Contents for CO-X Series

Page 1: ...the platform using a gasket between the assembly and the platform Using the bolts from the fan above fasten with the nuts provided Attach the fan discharge to the ductwork For attachment of the optional balancer see the instructions at the end of this manual 4 Wire the fan motor See the fan wiring diagrams on Page 2 Make sure the diagram matches the model number on the motor plate If it does not c...

Page 2: ...DV 9 LEADS This diagram covers most standard C FACE ODP 1 phase Baldor motors HP THRU 1 HP supplied on Car Mon CMW flange mount fans Check model numbers below VL1303 VL1306 VL1309 VL1313 ELEC CENT SWITCH OPTIONAL T STAT 1 2 3 4 J J 5 8 VOLT HIGH HIGH LOW LOW STD OPP STD OPP LINE A 1 1 1 3 8 1 3 5 LINE B 4 5 4 8 2 4 5 2 4 8 JOIN 2 3 8 2 3 5 _ _ SINGLE PHASE TYPE L DUAL VOLTAGE REVERSIBLE 6 LEAD CAR...

Page 3: ...of balancer CAUTION As tension is reduced tool will fall away from the balancer 3 Allow the shaft to turn SLOWLY in clockwise direction until tubing is lowered to desired working height CAUTION Do NOT allow the spring to unwind in an uncontrolled manner This can result in damage to the balancer and may result in personal injury RATCHET LOCK USE 1 Engage the ratchet lock by pulling cable out to des...

Page 4: ...kmanship or materials within 1 year from date of shipment The foregoing is in lieu of all warranties expressed or implied and all other obligations or liabilities on behalf of the company regarding products it may manufacture or sell Except as otherwise provided herein the purchaser accepts the product as is No warranty is made regarding the suitability or compatibility of any Car Mon product for ...

Reviews: