CarShow Installation Guide
– Honda CRV
CarShow
Copyright 2013 All Rights Reserved
Installation Guide
CS-CRV12-3
Page 8
Retaining OEM BT Steering Wheel Controls
This step is
ONLY
used on vehicles equipped with OEM Bluetooth. If your vehicle is not equipped
with OEM BT skip to step 6.
This step will walk you through how to retain the OEM BT Steering Wheel Controls. It is provided
ONLY so BT SWC are retained. OEM BT will NOT be functional.
STEP
5
Remove shift knob trim to access BT module
OEM BT module located behind shifter assembly
Use panel pry tool OR small flat head screwdriver to release
BT module connector
Reach down into radio cavity to access BT module
connector.
Yellow lead (Pin# 15 shown at right) gets connected to
“BT-SWC” wire coming off of CarShow SWC harness. Make
connection using a 3M T-Tap and male spade.
Do
NOT
reconnect BT module connector to BT module.
Reach down
CAUTION
CAUTION
