OSD implementation - DVD
To implement DVD OSD menu, installer must install DVD system on AV1 and connect “DVD IR” cable among navigation cables with remote
sensor cable of DVD.
2.6 Optional functions - OSD implementation
First of all, if you touch the screen on mode ”AV1”,
you can see the menu as shown left. And then if you
do NOT touch anything on the screen 5 seconds or
more long; or if you touch the screen except the
more long; or if you touch the screen except the
menu, the menu will disappear.
At that time, if you choose “INPUT”, you can get out
of the menu and see the mode change menu.(left
picture)
Here is a picture of the mode change menu. If you
select the channel which you want, then the channel
will be changed to that.(right picture)
>
>
As shown above, if you touch the screen on mode ”AV2”, you can see
the menu as shown left. And then if you do NOT touch anything on the
OSD implementation - CMMB, NAVI
DVD, DMB, navigation menu is available in English or Chinese. After implementing OSD menu with pushing “MENU” button on remote
controller, choose the language that you want to use.
www.car-solutions.com
14
>>>
>>>
the menu as shown left. And then if you do NOT touch anything on the
screen 5 seconds or more long; or if you touch the screen except the
menu, the menu will disappear.(left picture)
Here is a picture of the mode change menu. If you select the channel
which you want, then the channel will be changed to that.(right picture)
※
※
※
※
For adding this optional functions, you have to send the DVD or DTV that will be used to connect the interface, and the MOQ requires over than 70pc.
