41
© Erwin Hymer Group North America, Inc., R00
Awning Light
On the monitor panel, the top right switch is the awning light switch. Press the top of the button to turn the lights on, and the bottom to turn them
off. These are LED lights and use very little power. (Picture 40.1 on Previous Page)
Water Pump Switch
The lower left switch of the five switches is the water pump switch. It should be on only when you have water in the fresh water tanks and wish to
use the sinks, showers, or toilet. The pump should not be on without water in your tanks or supplied from an exterior water connection source. As
with the patio light switch, pressing the top of the button turns the pump on, and pressing the bottom turns it off. (Picture 40.2 on Previous Page)
Tank and Charge Indicators
The battery charge level indicator is located directly over the battery disconnect switch. The fresh
and black/grey water tank levels are located just over and to the right of the water heater switch.
The button to check these levels are located just to the right of the level indicators. Your battery
disconnect switch must be on for these displays to work. Press the button for each to see the
display. These will give you an approximate reading, to the nearest third, of how much is in each
tank. The four indicator levels for the water tanks are full, 2/3, 1/3 and empty. (Picture 41.1)
Tanks, LP and Charge Indicators.
Picture 41.1
