45
© Erwin Hymer Group North America, Inc., R00
Water Pump
To use the water in the tank, you need to turn on the water pump. (Picture 44.1 on Previous Page)
Check correct valve position for use with fresh
water tank and correct position when hooked up to an exterior water supply.
Black/Grey Tank
The bathroom sink and shower water drains into the black/grey water tank. The shower and sink have traps to prevent tank odors from entering the
living space. Be sure to replace the screw-in plug in the shower floor after use to prevent black/grey water from sloshing up into the shower pan
from the black/grey water tank while driving.
The black/grey water tank contains human waste material.
Please refer to the HOW TO’s: Waste Water Dumping section for an explanation of which materials you can and can't flush down the toilet.
Indicators
The black and fresh water tank level indicators located on the monitor panel will give you an approximate indicator of your tank levels. (Picture 45.1)
When the black water tank is full, water will no longer drain down the shower and sink drains, and you need to dump the tank before running any
more water. If you see fluid below the toilet valve in the bowl of the toilet, your black water tank is full
and needs to be emptied before further use.
See Monitor Panel for more information.
Ensure that both the black and grey water gate valves are closed before using the waste
water system. It is possible for the valves to open slightly especially after extensive driving.
Black and Fresh Water Tank Level
Indicators on Monitor Panel.
Picture 45.1
