56
© Erwin Hymer Group North America, Inc., R00
Inside Rope Lighting Controls
Your Carado comes equipped with dimmable 12V rope lighting. (Picture 56.1)
The 1 button power control is located at the top of your monitor panel within a fading black to white circle above the letter M. (Picture 56.2) The
12V rope system will not operate unless you have your Battery Disconnect switch in the
On
position.
•
To make your lights brighter, gently run your finger from the left side of the black to white circle to the right side. Stop at any point
when lighting has reached desired brightness. For full brightness slide your finger all the way to the end of the circle on the right-
hand side.
•
To lower the lighting, run your finger from the right side of the circle to the left. (Picture 56.3)
•
*
Note: The lights can be dimmed all the way to complete darkness. Please make sure your 12V rope lighting is off by using
the On/Off power control switch. Leaving the lighting dimmed to complete darkness will still draw on your batteries unless
the Battery Disconnect is in the Off Position
*.
Rope Lighting Wrapping Inside of
Coach.
Rope Lighting On/Off Control. Please
Note That 12V Battery Disconnect Must
Be in On Position for Lighting to Work.
Slightly Run Finger from Left to Right to
Make Lights Brighter and Opposite Right
to Left To Dim.
Picture 56.1
Picture 56.2
Picture 56.3
