37
E
ngl
ish
3. Initial start-up and operation
Diagram
Procedure
Place the appliance cautiously onto an even
surface. If necessary, put a soft and clean cloth
underneath to prevent the LED screen from
becoming scratched.
Detach the foot from the retaining plate by
slightly pulling the retaining collar out of the foot;
thereafter turn the TV set to the right side.
Remove the foot by unscrewing the six screws
on the back and bottom side of the foot.
3.5. Fastening on the VESA bracket
ATTENTION:
When mounting the VESA bracket, please observe that the screws (M4) must
not protrude into the appliance by more than 10 mm max.
For fastening the monitor on a bracket, the foot can be removed as follows:
+
+
+
+
