Version 14.02.2013
DVB-MK-AUX
S
eit
e
7
3.2.
Connections to the navigation computer or – if existing – to the TV-tuner
If there is a factory TV-tuner inside the car, you have to connect the harness C3C-BMW700
to the TV-tuner and not to the navigation computer!
Disconnect blue female 18pin connector of vehicle harness from the back of the
navigation computer or the factory TV-tuner (if existing and not removed).
Plug blue male 18pin AMP connector of harness C3C-BMW700 into blue female 18pin
AMP connector of vehicle harness.
Plug blue female 18pin AMP connector of harness C3C-BMW700 into blue male 18pin
AMP connector of navigation computer or of the factory TV-tuner (if existing and not
removed).
Note:
If an existing factory TV-tuner will be removed the optionally available harness CAB-
BMW200 is necessary!
