Version 28.05.2015
RL-LR12-TF
Pa
ge
7
4.
Activation of the video-in-motion function
TV-400
The video-in-motion function is activated permanently without disturbing the navigation
performance.
Note
: The loose white and green cable are not required and must be isolated.
TV-500
The video-in-motion can be activated and deactivated by Dip 1 or alternatively by the
included loose green cable in connection with a switch (not included in delivery).
Video-in-motion permanent
With dip1 to ON the video-in-motion function is activated permanently without disturbing
the navigation performance.
Video-in-motion selective
With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Connect a switch to the green cable and connect the green cable to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
Note
: The loose white cable is not required and must be isolated.
www.eldibg.com
car audio & multimedia system
