FOR TEC HNICAL SUPPOR T CALL
1800 658 111
18
CDC-850P
ASSEMBLY
5.
Mount the two drum lid lift clamps to
the tangs with the 8x machine screws
and washers. The long threaded bolts
should face downwards.
Fig. E2A
6.
Attach the large diameter flexible hose
with a corresponding hose clamp to the
drum lid.
Fig. E2A
7.
Attach the drum lid to the lower cone
by the drum lid lifting clamps, using
the large nut to retain it on both sides.
These nuts and lock nuts can be
adjusted later to ensure a good seal of
drum lid to drum.
Fig. E3
8.
Attach the top of the large diameter
flexible hose, to the lower part of the
cyclone cone, with the other large
diameter hose clamp.
Fig. E3B
9.
Install the canister/cartridge filter
assembly with the M8x16 bolts, to the
underside of the main impeller housing.
10.
Insert the perforated drum ring in the
bottom of the collection drum before
placing the plastic collection bag inside
the drum not required if you are running
the system in bagless configuration.
See pg. 19 Fig. F
11.
Check for an effective drum lid to drum
seal, and adjust the drum lid lifting
clamps as required.
A
Fig. E4
Fig. E3
Fig. E2
A
B
