CARBATEC.C OM.AU
11
DC-1200P
SAFETY INSTRUCTIONS
FIG. B
FIG. A
!
This tool must be grounded while in use to
protect the operator from electric shock. IN THE
EVENT OF A MALFUNCTION OR BREAKDOWN,
grounding provides the path of least resistance
for electric current and reduces the risk of electric
shock. This tool may be equipped with an electric
cord that has an equipment grounding conductor
and a grounding plug.
The plug MUST Be plugged
into a matching electrical receptacle that is
properly installed and grounded in accordance
with
ALL
local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED.
If it will not fit the electrical receptacle, have the
proper electrical receptacle installed by a
qualified electrician.
IMPROPER ELECTRICAL CONNECTION
of the
equipment grounding conductor can result in
risk of electric shock. The conductor with the
green insulation (with or without yellow stripes)
is the equipment grounding conductor. DO NOT
connect the equipment grounding conductor to a
live terminal if repair or replacement of the electric
cord or plug is necessary.
CHECK WITH A QUALIFIED ELECTRICIAN
or service personnel if you do not completely
understand the grounding instructions, or if you
are not sure the tool is properly grounded.
Use only a 3-wire extension cord that has a
3-prong grounding plug and a 3-pole receptacle
that accepts the tool’s plug. Replace a damaged
or worn cord immediately.
Power tools and machinery are intended for use
on a circuit that has an electrical receptacle as
shown in
FIGURE A
that shows a 10 Amp 3-wire
electrical plug and corresponding electrical
receptacle that has a grounding conductor.
If this particular tool has been designed and fitted
with a two prong electrical plug, ensure it displays
the ‘Double Insulated’ logo shown in
FIGURE B
,
before connecting to a 3- wire receptacle.
!
Never modify the standard fitted electrical
plugs to fit your receptacle.
ELECTRICAL SAFETY
