CARBATEC.C OM.AU
3
DC-1200P
If you cannot find an item on this list, carefully
check around and inside the machine and remove
packaging materials from the cartons. Often,
these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.
!
DO NOT
use acetone, gasoline or lacquer thinner
to remove any protective coatings.
1.
Remove parts from all of the cartons
and lay them on a clean work surface.
2.
Remove any protective materials and
coatings from all of the parts of the cyclone
dust extractor. The protective coatings can
be removed by spraying WD-40 on them and
wiping it off with a soft cloth. This may need
to be redone several times before all of the
protective coatings are removed completely.
3.
Compare the items above to verify that all
items are accounted for before discarding
the shipping box.
O
N
M
L
K
J
I
H
G
F
E
D
C
B
A
A.
Hose
B.
Collector body & fan/motor
assembly
C.
Collector
D.
Base
E.
Upper bag support
F.
Collector supports
G.
Inlet
H.
Filter & collection bags
I.
Seal
J.
Four casters
K.
Fastener packs
L.
Outlet adaptor
M.
Two hose clamps
N.
Handle
O.
Bag clamp
The following items are provided in 1 package (1 carton).
WHAT’S IN THE BOX
WELCOME
Remove all packing materials from carton. Some components are packed under packaging.
